DOOR WINDOW CONTACT NORMALLY OPEN

The Tyco DSC WS4945N wireless door/window normally open contact features a pre-installed battery that is activated by installers through a pull tab. This helps reduce installation time as casings don't need to be opened for battery insertion. Simply draw the activation pull tab and mount the contact. To help further simplify the installation process, DSC has placed the PCB on thecontact's cover. If you prefer to mount the contact using screws (recommended when using the wall tamper option), the new designdoes not require the removal of the PCB to do so. The WS4945N has become the new DSC standard for door/window contacts due to its streamlined profile (30% smaller than its predecessor the WLS925L-433/ WLS935L) and new design that allows for double-sided tape mounting. These features combine to help get you in and out of your jobs faster than ever before. The WS4945N is designed for dependable case- or wall-tamper detection. Depending on how the contact is purposed, it will send a signal to the alarm system if either its casing is opened or if it is forcibly removed from a wall.If the alarm system is armed when this occurs, an alarm will be activated and the central station will be notified of the violation (if programmed to do so). The WS4945 also features an external contact input that allows a standardhardwired door to be connected to it. This is useful for installations where it is difficult to mount the magnet within the maximum allowable gap of the contact (5/8- [16 mm]). Significantly smaller than many door/window contacts,the WS4945N is housed within a compact casing that allows it to be used for the tightest-fitting installations. Once installed, the contact is inconspicuous and complements the decor of most homes. It is built with reliable 433 MHz technology, uses a long-life lithium battery and is compatible with all current DSC wireless receivers.